Connect With WPA

Copy
1/*
2
3 This example connects to an unencrypted Wifi network.
4
5 Then it prints the  MAC address of the Wifi shield,
6
7 the IP address obtained, and other network details.
8
9 Circuit:
10
11 * WiFi shield attached
12
13 created 13 July 2010
14
15 by dlf (Metodo2 srl)
16
17 modified 31 May 2012
18
19 by Tom Igoe
20
21 */
22#include <SPI.h>
23#include <WiFi.h>
24
25char ssid[] = "yourNetwork";     //  your network SSID (name)
26char pass[] = "secretPassword";  // your network password
27int status = WL_IDLE_STATUS;     // the Wifi radio's status
28
29void setup() {
30
31  //Initialize serial and wait for port to open:
32
33  Serial.begin(9600);
34
35  while (!Serial) {
36
37    ; // wait for serial port to connect. Needed for native USB port only
38
39  }
40
41  // check for the presence of the shield:
42
43  if (WiFi.status() == WL_NO_SHIELD) {
44
45    Serial.println("WiFi shield not present");
46
47    // don't continue:
48
49    while (true);
50
51  }
52
53  String fv = WiFi.firmwareVersion();
54
55  if (fv != "1.1.0") {
56
57    Serial.println("Please upgrade the firmware");
58
59  }
60
61  // attempt to connect to Wifi network:
62
63  while (status != WL_CONNECTED) {
64
65    Serial.print("Attempting to connect to WPA SSID: ");
66
67    Serial.println(ssid);
68
69    // Connect to WPA/WPA2 network:
70
71    status = WiFi.begin(ssid, pass);
72
73    // wait 10 seconds for connection:
74
75    delay(10000);
76
77  }
78
79  // you're connected now, so print out the data:
80
81  Serial.print("You're connected to the network");
82
83  printCurrentNet();
84
85  printWifiData();
86
87}
88
89void loop() {
90
91  // check the network connection once every 10 seconds:
92
93  delay(10000);
94
95  printCurrentNet();
96}
97
98void printWifiData() {
99
100  // print your WiFi shield's IP address:
101
102  IPAddress ip = WiFi.localIP();
103
104  Serial.print("IP Address: ");
105
106  Serial.println(ip);
107
108  Serial.println(ip);
109
110  // print your MAC address:
111
112  byte mac[6];
113
114  WiFi.macAddress(mac);
115
116  Serial.print("MAC address: ");
117
118  Serial.print(mac[5], HEX);
119
120  Serial.print(":");
121
122  Serial.print(mac[4], HEX);
123
124  Serial.print(":");
125
126  Serial.print(mac[3], HEX);
127
128  Serial.print(":");
129
130  Serial.print(mac[2], HEX);
131
132  Serial.print(":");
133
134  Serial.print(mac[1], HEX);
135
136  Serial.print(":");
137
138  Serial.println(mac[0], HEX);
139
140}
141
142void printCurrentNet() {
143
144  // print the SSID of the network you're attached to:
145
146  Serial.print("SSID: ");
147
148  Serial.println(WiFi.SSID());
149
150  // print the MAC address of the router you're attached to:
151
152  byte bssid[6];
153
154  WiFi.BSSID(bssid);
155
156  Serial.print("BSSID: ");
157
158  Serial.print(bssid[5], HEX);
159
160  Serial.print(":");
161
162  Serial.print(bssid[4], HEX);
163
164  Serial.print(":");
165
166  Serial.print(bssid[3], HEX);
167
168  Serial.print(":");
169
170  Serial.print(bssid[2], HEX);
171
172  Serial.print(":");
173
174  Serial.print(bssid[1], HEX);
175
176  Serial.print(":");
177
178  Serial.println(bssid[0], HEX);
179
180  // print the received signal strength:
181
182  long rssi = WiFi.RSSI();
183
184  Serial.print("signal strength (RSSI):");
185
186  Serial.println(rssi);
187
188  // print the encryption type:
189
190  byte encryption = WiFi.encryptionType();
191
192  Serial.print("Encryption Type:");
193
194  Serial.println(encryption, HEX);
195
196  Serial.println();
197}