TFTGraph

TFT Graph

This example for the Arduino TFT screen reads the value of a potentiometer, and graphs it on screen. This is similar to the serial communication Graph example.

Hardware Required

• Arduino Uno

• Arduino TFT screen

• breadboard

• hookup wire

• one 10-kilohm potentiometer

Circuit

Connect power and ground to the breadboard.

Place the potentiometer on the breadboard. Connect one side to ground, and the other to power. Connect the middle pin to A0.

Connect the TFT screen to the breadboard. The headers on the side of the screen with the small blue tab and arrow should be the ones that attach to the board. Pay attention to the orientation of the screen, in these images, it is upside down.

Connect the BL and +5V pins to power, and GND to ground. Connect CS-LD to pin 10, DC to pin 9, RESET to pin 8, MOSI to pin 11, and SCK to pin 13. If you're using a Leonardo, you'll be using different pins. see the getting started page for more details.

Click the image for a larger version

Code

To use the screen you must first include the SPI and TFT libraries.

Copy
1#include <SPI.h>
2#include <TFT.h>

Define the pins you're going to use for controlling the screen, and create an instance of the TFT library named

TFTscreen

Copy
1#define cs   10
2#define dc   9
3#define rst  8
4
5TFT TFTscreen = TFT(cs, dc, rst);

Create a variable for holding the position of the x-axis of the graph. You'll increment this each

loop()

setup()

Copy
1int xPos = 0;
2
3void setup(){
4
5  TFTscreen.begin();
6
7  TFTscreen.background(250,16,200);
8}

In

loop()

Copy
1void loop(){
2
3  int sensor = analogRead(A0);
4
5  int graphHeight = map(sensor,0,1023,0,LCDscreen.height());

Set the stroke color to something that will stand out against the nice color you chose for the background, and draw a line from the bottom of the screen based on the value of the sensor

Copy
1TFTscreen.stroke(250,180,10);
2
3  TFTscreen.line(xPos, TFTscreen.height() - graphHeight, xPos, TFTscreen.height());

Before closing up

loop()

Copy
1if (xPos >= 160) {
2
3    xPos = 0;
4
5    TFTscreen.background(250,16,200);
6
7  }
8
9  else {
10
11    xPos++;
12
13  }
14
15  delay(16);
16}

The complete sketch is below :