ARDUINO.CC
Go Back
Legacy Documentation
Home / Hardware / Legacy Documentation / EsploraTFTTemp
Note: this page refers to a product that is retired.

EsploraTFTTemp

Check the temperature with the onboard sensor and display it on screen.

Last revision 01/16/2024

Esplora TFT Temperature Display

This example for the Esplora with an Arduino TFT screen reads the temperature with the onboard thermisistor, and prints it out on screen.

Hardware Required

  • Arduino Esplora

  • Arduino TFT screen

Circuit

Esplora GLCDTemp

Attach the TFT screen to the socket on your Esplora, with the label "SD Card" facing up.

Code

To use the screen you must first include the SPI and TFT libraries. Don't forget to include the Esplora library as well.

1#include <Esplora.h>
2#include <TFT.h>
3#include <SPI.h>

To update the screen with text, you'll need to store dynamic content in a char array.

char tempPrintout[3];

In 

setup()
, initialize the screen and clear the background. Set the color for the font with 
stroke()
, and write any static text to the screen. In this case, you'll write "Degrees in C :". This will stay at the top of the screen and not change as long as the sketch runs. Before entering the 
loop()
, set the text size so you can really see the temperature stand out.

1void setup(void) {
2

3  EsploraTFT.begin();
4

5  EsploraTFT.background(0,0,0);
6

7  EsploraTFT.stroke(200,20,180);
8

9  EsploraTFT.setTextSize(2);
10

11  EsploraTFT.text("Degrees in C :\n ",0,0);
12

13  EsploraTFT.setTextSize(5);
14}

In 

loop()
, read the temperature in Celsius with 
Esplora.readTemperature(DEGREES_C)
, storing it in a string. Convert the string content to a char array, storing it in the global array you declared int he beginning of your program.

1void loop() {
2

3  String temperature = String(Esplora.readTemperature(DEGREES_C));
4

5  temperature.toCharArray(tempPrintout, 3);

Set the text color (this would be a good place to change the color of the text depending on the value from the thermometer), and print it to the screen below the static text.

1EsploraTFT.stroke(255,255,255);
2

3  EsploraTFT.text(tempPrintout, 0, 30);

Wait for one second, then erase the text you just wrote, so you can update it in the next run through 

loop()
.

1delay(1000);
2

3  // erase the text for the next loop
4

5  EsploraTFT.stroke(0,0,0);
6

7  EsploraTFT.text(tempPrintout, 0, 30);
8}

The complete sketch is below :

1/*
2

3 Esplora TFT Temperature Display
4

5 This example for the Arduino TFT screen is for use
6

7 with an Arduino Esplora.
8

9 This example reads the temperature of the Esplora's
10

11 on board thermisistor and displays it on an attached
12

13 LCD screen, updating every second.
14

15 This example code is in the public domain.
16

17 Created 15 April 2013 by Scott Fitzgerald
18

19 http://www.arduino.cc/en/Tutorial/EsploraTFTTemp
20

21 */
22

23// include the necessary libraries
24#include <Esplora.h>
25#include <TFT.h>            // Arduino LCD library
26#include <SPI.h>
27

28char tempPrintout[3];  // array to hold the temperature data
29

30void setup() {
31

32  // Put this line at the beginning of every sketch that uses the GLCD
33

34  EsploraTFT.begin();
35

36  // clear the screen with a black background
37

38  EsploraTFT.background(0, 0, 0);
39

40  // set the text color to magenta
41

42  EsploraTFT.stroke(200, 20, 180);
43

44  // set the text to size 2
45

46  EsploraTFT.setTextSize(2);
47

48  // start the text at the top left of the screen
49

50  // this text is going to remain static
51

52  EsploraTFT.text("Degrees in C :\n ", 0, 0);
53

54  // set the text in the loop to size 5
55

56  EsploraTFT.setTextSize(5);
57}
58

59void loop() {
60

61  // read the temperature  in Celsius and store it in a String
62

63  String temperature = String(Esplora.readTemperature(DEGREES_C));
64

65  // convert the string to a char array
66

67  temperature.toCharArray(tempPrintout, 3);
68

69  // set the text color to white
70

71  EsploraTFT.stroke(255, 255, 255);
72

73  // print the temperature one line below the static text
74

75  EsploraTFT.text(tempPrintout, 0, 30);
76

77  delay(1000);
78

79  // erase the text for the next loop
80

81  EsploraTFT.stroke(0, 0, 0);
82

83  EsploraTFT.text(tempPrintout, 0, 30);
84}

Suggest changes

The content on docs.arduino.cc is facilitated through a public GitHub repository. If you see anything wrong, you can edit this page here.

Need support?

Help CenterAsk the Arduino ForumDiscover Arduino Discord

License

The Arduino documentation is licensed under the Creative Commons Attribution-Share Alike 4.0 license.

ON THIS PAGE